KS series water level?switch is a component designed for checking water level. According to the water level, the product will switch to different circuit to the supply/drain solenoid valve of the appliance.
| Contact capacity |
1-3:16A/250VAC |1mA/5V 1-2:10A/250VAC |
|
| Insulation resistance | The live parts and exposed non current carrying metal DC500V voltage is applied to its insulation resistance should be greater than 100MΩ | |
| Electrical strength | The AC1500V, 50Hz voltage applied between a conductive part and non conductive part of metal continuous 1min, or AC50Hz 1875V/1s, should be no flashover or breakdown phenomenon. | |
| Water level | Water level of action |
83mm±3mm |
| Water level of reset | 58mm±3mm | |
| Water level of water flow | / | |
| Terminal specification | 0.8mm×6.3mm | |
| Free fall | At the height of 0.3m, for arbitrary free fall in more than 20mm thick board 3, components in any respect are not damaged, no abnormal action. | |
| Stable movement | From the air inlet and water pressure to make the switch action 10 times in a row, measure the action level, its change value should be less than 5mm. | |
| Shell heat torrence | Through 850 ℃glow wire test | |
| Humidity test | Place water level switch at a temperature of 40 ±2℃ and 95% relative humidity environment placed 48 h, inside the direct measurement of conductive part exposed conductive part and non between insulation resistance should be greater than 2MΩ, after 30 min recovery, should be consistent with the requirements of voltage resistance, insulation resistance. High water level change is no more than ±20mmH2O | |
| The life of contact | Selection of high water level, according to the use state of work more than 20000 times, should be able to work normally. | |
| Environmental requirements | The products and packaging are in line with the EU RoHS directive 2011/65/EU |
Home appliance accessories, lightning protection appliances, product service providers
Zhejiang ICP No. 05001732-1 
Shenlong official WeChat account
